Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Installation
1
Installing the faucet assembly
CAUTION: Always turn off the water supply before
removing an existing faucet or replacing any part of a
faucet. Open the faucet handle to relieve water pressure
and ensure that the water is completely shut off.
□
Shut off the water supply. Remove the old
faucet.
□
Place the gasket (B) onto the bottom of the new
faucet assembly (A).
□
Place the faucet assembly (A) through the
mounting holes in the sink.
□
Secure the faucet assembly (A) to the sink
using the washers (C) and nuts (D) provided.
NOTE: If the sink is uneven, use silicone under the
gasket (B).
A
B
C
D
2
Making the waterline
connections
NOTE: The hot side inlet tube is indicated by a label.
If the label is not present, the hot supply tube is the longer
of the two inlet tubes.
□
Use 1/2 in. I.P.S. faucet connections (2), or use
supply line coupling nuts (3) (not included) with
a 3/8 in. O.D. ball-nose riser (1).
1
3
NOTE: Before tightening the faucet connector to the water
supply, apply a second wrench to the supply tube tting.
This will prevent the supply tube from moving or twisting
when tightening the faucet connector. Do not overtighten.
5
Please contact 1-855-HD-GLACIER for further assistance.
2
HOMEDEPOT.COM
Capítulos
Tabla de contenido
