TECshow ORBIT HEX Manual De Usuario página 8

DMX-512 control connection
Connect the provided XLR cable to the male 3-pin XLR out-
put of your controller and the other side to the female 3-pin
XLR input of the light.You can chain multiple lights together
through serial linking, the signal cable should have two core
with shielded cable, the signal connectors are with XLR input
and output connectors. Please refer to the below diagram:
DMX address setting
Each fixture must set a specific starting address. When re-
ceiving signal, fixture will receive channel control signals of
this address from the DMX controller.
For easy to use, the user can set the same address for several
fixtures , also can set up a unique address for every device.
If you set the same address for all fixtures, all the fixtures will
receive from the same DMX channels signal. All connecting
fixtures are jointly controlled, controller can't separate con-
trol a device.
If you set a different address for each fixture, each fixture will
receive unique signal and can be controlled by DMX control-
ler separately.
This fixture has 12 channels.you should set the starting ad-
dress of the first unit to 1, the second unit to 14(1*13 + 1), the
third unit to 27(2*13+ 1), and so on.
ORBIT HEX
ENGLISH VERSION
p. 8