6. Flight
Ready to Go (GPS)
In the DJI GO App:
Auto Takeoff
The aircraft will take off and hover at
an altitude of 4 feet (1.2 meters).
Return-To-Home
Brings the aircraft back to the Home
Point. Tap again to stop the procedure.
Manual Takeoff
OR
Combination Stick Command
to start/stop the motors
Never stop the motors mid-flight, otherwise the aircraft will crash. Only stop the motors when the aircraft is on the ground
●
or in emergencies to reduce the risk of damage or injury.
7. Fly Safe
DJI encourages you to enjoy flying in a safe, responsible and smart way.
DO NOT FLY near or above people, near
trees, power lines or buildings.
DO NOT FLY in rain, snow, fog, and wind
speeds exceeding 22 mph or 10 m/s.
6
Before taking off, ensure the Aircraft Status Bar in the DJI GO app
indicates 'Ready to Go (GPS)'.
The aircraft will not avoid obstacles while it is returning to
●
the Home Point, and an appropriate RTH altitude MUST
be set before flight. You should also use the control
sticks to guide the aircraft. Refer to the Safety Guidelines
and Disclaimer for more details.
Left stick up (slowly)
to take off
400 ft
Always
fly under
DO MONITOR YOUR ALTITUDE
and fly under 400 feet
(120 meters).
DO MAINTAIN LINE OF SIGHT
and avoid flying behind buildings
or obstacles that block your view.
Auto Landing
The aircraft will land vertically and stop its
motors.
Manual Landing
Left stick down (slowly)
until you touch the ground
Hold a few seconds to stop
the motors
It's important to understand
basic flight guidelines, for the
safety of both you and those
around you. Don't forget to
read the Disclaimer and Safety
Guidelines.
More information at:
http://www.dji.com/flysafe/
no-fly
No Fly Zones