Conceptronic CUPSOF600 Guía Rápida página 4

English

Charging
This unit is shipped from the factory with its internal battery fully charged,
however, some charge may be lost during shipping and the battery should be
recharged prior to use. Plug the unit into an appropriate power supply and
allow the UPS to charge fully by leaving it plugged in for at least 8-10 hours
with no load (no electrical devices such as computers, monitors, etc.)
connected.

Computer Connection
Connect one computer-related device into one of the battery supplied
receptacles on the top of UPS. New office UPS provides four receptacles, all
for surge protection, two plus battery backup.