Idiomas disponibles
Idiomas disponibles
Before using your new Steren´s product, please read this instruction
manual to prevent any damage.
I M P O R T A N T
The instructions of this manual are for reference about the product. There may
be differences due to updates. Please check our web site (www.steren.com) to
obtain the latest version of the instruction manual.
H I G H L I G H T S
The RGB LED strip offers you great variety of colors, mixing the primary one (red, green, blue).
It can support water and dust due to the perfect plastic sealing, being perfect
to be installed indoor or outdoor. It is highly flexible, so you can install it in different surfaces and
plain areas.
It includes adhesive tape for an easy installation.
The strip has a total length of 5m. It requires an independent controller (not included) for working
and connection.
It is very light weight and the power consumption is very low.
C O N T R O L S
Strip LED
1. Strip LED connector
- Controller
2. Power Input
3. LED power strip input
4. Infrared LED
- Remote control
5. On
6. Off
7. Decrease the intensity
8. Increase the intensity
9. Red light
10. Green light
11. Blue Light
12. White light
13. Multicolor light (RGB only)
14. Fast multicolor lights (RGB
only)
15. Degraded lights (RGB only)
16. Soft light (RGB only)
17. Variation of color shades
I N S T A L L A T I O N
1. Select and clean the area where you want to
install the LED strip.
2. Be asure of the LED strip length.
In case you need to cut the strip, make the cut
on the score line, the flexible strip can be cut
every 3 LEDs (5 cm).
3. Remove the protective tape located at the
bottom of the strip and place in the desired
area (plastic, metal, aluminum, glass, wood
and so on).
1
4
3
8 7
6
5
11
OFF
ON
9
12
R
G
B
W
10
13
FLASH
14
STROBE
15
FADE
16
SMOOTH
4
17
2
3
8 7
6
5
11
OFF
ON
9
12
R
G
B
W
10
13
FLASH
14
STROBE
15
FADE
16
SMOOTH
17
2
1. Plug the controller with the strip LED
connector and make sure to both ar-
rows are aligned.
2. Connect an adapter (not included)
into the power input of the controller
and insert it into an electrical outlet.
We recommend to use an adapter with next specs: 12-24 V --- 6 A with positive polarity in
the middle
J O I N I N G L E D S T R I P S
1. Carefully remove the protective plastic layer.
2. Insert four wires into the holes of the terminals (check polarity).
3. Solder using a soldering iron and tin solder.
4. Insulate the connection using electrical tape, silicone or thermofit.
+
12V
G
R
B
H O W T O U S E
Once connected to the power immediately the LED strip will light on.
1. Remove the protection tab of the battery in the remote control.
2. Press any button to control different functions.
3. If you need to turn off the LED strip press OFF, press ON to power on.
S P E C I F I C A T I O N S
LED strip
Input: 12 V- - -
Consumption: 9 W per meter
Nominal consumption: 35 W/h
Stand-by power consumption: not applicable.
Product design and specifications are subject to change without notice.
Product: 300 RGB LED strip
Part number: MODLED-300/RGB
Brand: Steren
This Steren product is warranted under normal usage against defects in workmanship and materials to the original purchaser for one year from
the date of purchase.
1. This warranty card with all the required information, invoice or purchase ticket, product box or package, and product, must be presented when
warranty service is required.
2. If the product is in the warranty time, the company will repair it free of charge.
3. The repairing time will not exceed 30 natural days, from the day the claim was received.
4. Steren sell parts, components, consumables and accessories to customer, as well as warranty service, at any of the addresses mentioned later.
THIS WARRANTY IS VOID IN THE NEXT CASES:
If the product has been damaged by an accident, acts of God, mishandling, leaky batteries, failure to follow enclosed instructions, improper repair by
unauthorized personnel, improper safe keeping, among others.
a) The consumer can also claim the warranty service in the purchase establishment.
b) If you lose the warranty card, we can reissue it, if you show the invoice or purchase ticket.
RETAILER INFORMATION
Name of the retailer ____________________________________
Address _____________________________________________
Product ______________________________________________
Brand _______________________________________________
Serial number _________________________________________
Date of delivery _______________________________________
In case your product fails or have questions, please contact your nearest dealer. If you are in Mexico, please call to our Call Center.
C O N N E C T I O N
+
12V
G
R
B
Controller
Input: 12 V - - - 3 A
Output: 12 V - - -
Remote control
Input: 3 V - - - (CR2025)
WARRANTY
CONDITIONS
01 800 500 9000
