Clock And Week Timer Settings - Nederman High Vacuum Starter Manual De Instrucciones

EN High Vacuum Starter, Advanced
12.2

Clock and week timer settings

(Settings necessary only when utilising the week timer function.)
Clock
SIEMENS
(Press On/Standby)
0
Press
ESC
SIEMENS
VIEU MESSAGES
Result after setting (Ex-
ample)
SIEMENS
TUESDAY
This example shows March 20:th
in the year of 2001 at 14:47:10,
a Thuesday. (The clock has 24 h
display only.)
Week timer
The week timer requires correct setting of the clock. Week timer settings are stored permanently
and are not affected by long term failure of power supply. Default setting for the week timer func-
tion is "Off" i.e. Not active.
SIEMENS
(Press On/Standby)
0
Press (11X)
SIEMENS
WEEK TIMER (WT) 0
Off=0 On=1 Setting=2
24
Starting point for setting
TD 200
the clock
The installation is at standstill and
the display status is as per illustra-
tion
SHIFT ESC ENTER
TD 200
Press
SHIFT ESC ENTER
Press to set date
ENTER
Press to set month
ENTER
Press to set year
ENTER
TD 200
Press to set hour
ENTER
Press to set minute
ENTER
SHIFT ESC ENTER
Press to set second
ENTER
Press to set week day
ENTER
Press to confirm week day and return
ENTER
to 0
Starting point for week timer settings
The installation is at standstill with display status as per il-
TD 200
lustration
SHIFT ESC ENTER
Press to select the Week Timer (WT).
ENTER
TD 200
Code figure 0 (or 1 or 2) flashes and can
now be altered.
Press to confirm setting 2.
ENTER
SHIFT ESC ENTER
NOTE!
for daylight saving hours!
During failure of power supply
the clock runs another 120 h.
Thereafter new settings must
be made.
(3X)
Change clock settings
SIEMENS TD 200
SET TIME AND DATE
SHIFT ESC ENTER
Forwards
Backwards
Forwards
Backwards
Forwards
Backwards
Forwards
Backwards
Forwards
Backwards
Forwards
Backwards
Forwards
Backwards
Select 2 (setting)