English; General Description (Fig. 1); Important - Philips HR1720/50 Manual De Instrucciones

EnglisH

6

general description (Fig. 1)

Motor unit
A
Blender
On/off/pulse knob
B
Blender jar with level indication
C
Blade unit
D
Sealing ring
E
Lid
F
Measuring cup
G

important

Read these instructions for use carefully before using the appliance and save them for future
reference.
general
Check if the voltage indicated on the appliance corresponds to the local mains voltage (110-
,
10/17V, or 0-0/0V) before you connect the appliance.
If the mains cord is damaged, it must be replaced by Philips, a service centre authorised by
,
Philips or similarly qualified persons in order to avoid a hazard.
Always unplug the appliance from the mains before assembling, disassembling or making
,
adjustments to any of the accessories.
Never switch the appliance on and off by turning the accessories. ,
Never immerse the motor unit in water or any other fluid, nor rinse it under the tap. Use
,
only a moist cloth to clean the motor unit.
Never let the appliance run unattended.
,
Keep the appliance out of the reach of children.
,
Avoid touching the blades, especially when the appliance is plugged in. The blades are very
,
sharp!
Never reach into the blender jar with your fingers or an object while the appliance is
,
running.
Never place the blade unit onto the motor unit without having the (blender or mill) jar
,
properly attached.
If the blades get stuck, unplug the appliance before removing the ingredients that are blocking
,
the blades.
If necessary use a spatula to remove food from the wall of the jar after you have switched off the
appliance.
Always make sure that the blade unit is correctly assembled before you plug the appliance in
,
and switch it on.
Never use any accessories or parts from other manufacturers that have not been specifically
,
advised by Philips. Your guarantee will become invalid if such accessories or parts have been
used.
Electromagnetic fields (EMF)
This Philips appliance complies with all standards regarding electromagnetic fields (EMF). If handled
properly and in accordance with the instructions in this instruction manual, the appliance is safe to
use according to scientific evidence available today.
Blender
Never fill the blender jar with ingredients that are hotter than 80 cC. ,
To prevent spillage, do not put more than 1.5 litres of liquid in the blender jar, especially
,
when you are processing at a high speed. Do not put more than 1 litre in the blender jar
when you are processing hot liquids or recipes that create a great deal of foam.