Heating Operation State; Auto Operation (Single Set Point); Operation Instructions - Sub Function; Setback - LG PREMTC00U Manual De Instalación

OPERATION INSTRUCTIONS - Standard Operation
12

Heating operation state

For the case of cooling only model, you can
adjust the temperature from hot to cold, from
"-2" to "2" based on "0".
2 : When cold
1 : When cool
0 : When appropriate
-1 : When warm
-2 : When hot
!
NOTE
• When remote controller has a
connection with indoor unit that does not
support 'dual setpoint', thermal
operation function of indoor unit is
replaced with ON/Off control from the
wired remote, when the user sets target
temperatures in the below ranges.
- cooling target temp. range :
87~99 °F (30.5~37.5 °C)
- heating target temp. range :
40~59 °F (4~15.5 °C).

Auto operation (Single set point)

This function automatically manages room
temperature based on set temperature and
provides a comfortable environment.
1
Press button to select auto mode.
2
Press buttons and then temperature
will blink.
3
You can control the blinking temperature
by pressing bottons.

OPERATION INSTRUCTIONS - Sub Function

OPERATION INSTRUCTIONS - Sub Function

Setback

The setback operation returns to the set
temperature until the setback operation is
canceled.
1
Press button for 3 seconds, you can
operate/cancel setback.
h You cannot change the setting in setback
operation, except to cancel the mode.
- 'HL' lock is displayed on the window.
13

Override

The override operation temporarily returns to
the set temperature until the override
operation is canceled.
1
Press button for 3 seconds, you can
operate/cancel override.
h You cannot change the setting in override
operation, except to set sub function and
cancel the mode.
- 'HL' lock is displayed on the window.
- It is only applied for 'UNOCCUPIED'.