Maintenance And Care - HURAKAN HKN-LSJ18Lx1 Manual De Instrucciones

20 cm
4. Connect the power supply.
OPERATION
1. Check the level when pouring drinks into the hopper. Exceeding the maximum drink level
in the hopper is not permitted. It may result in liquid penetration into the mixing mecha-
nism and the equipment failure.
2. Temperature of drinks loaded into the dispenser shall not exceed 35°C; higher tempera-
ture may affect the cooling system and result in early failure of the equipment.
3. To turn on the cooling mode, press the relevant switch; compressor cooling fan will start,
and the cooling system will be activated. After that, the mixing mechanism will start.
4. Once the acceptable beverage temperature is achieved, put the glass to the dispensing
outlet and slightly press the lever; the beverage will be poured into the glass.
5. Once the preset drink temperature is achieved, the cooling will stop, the compressor will
start automatically at regular intervals to maintain this temperature.
6. Cooling cycle shall always be completed as normal. For that reason, it is necessary to re-
start the equipment within 5 minutes after an accidental turning off and power it off using
the switch, if necessary.

MAINTENANCE AND CARE

Turn off the power before any maintenance.
Do not clean the equipment using any abrasive materials, metallic sponges and brushes, prick-
ing and cutting items, aggressive chlorine-containing cleaning agents, gasoline, acids, alkalies
and solvents.
Do not wash detachable equipment assemblies in a dishwasher.
1. To comply with sanitary regulations, timely wash the equipment components and pro-
vide the careful maitenance.
2. To clean the drink feeding system: unscrew the nut [5] or turn the outlet at 90° and
remove it.
20 cm
EN
11