Kohler K-3145 Guia De Instalacion página 6

Cut-Out
4. Install the Sink
Apply a bead of quality sealant to the underside of the sink rim.
NOTE: The fasteners may need to be repositioned to compensate for
an uneven countertop.
Squarely position the sink onto the cut-out area.
Rotate the clip jaws underneath the countertop, as illustrated.
Tighten the hex nuts to lower the sink rim down onto the
countertop. Do not overtighten.
Use a dry cloth to wipe away any excess sealant.
Verify that there are no gaps.
Allow the sealant to cure for at least 30 minutes.
Install the garbage disposal, if used, according to the
manufacturer's instructions.
Connect and tighten the trap to the strainer, and complete the
water supply connections to the faucet according to the
instructions packed with the faucet.
Run water into the sink and check for leaks.
1013270-2-E
Countertop
Clip Jaw
Hex Nut
Installation Clips
6
Sink
Kohler Co.