Tabla de contenido
20 | English
Status indications
Battery charge indicator
Meaning/cause
(user interface) (14)
Green
Battery charged
Yellow
Battery almost empty
Red
Battery empty
Overload protection indic-
Meaning/cause
ator (user interface) (18)
Yellow
Critical temperature has been reached (mo-
tor, electronics, battery)
Red
Power tool is overheated and will switch off
Power tool status indicator
Meaning/cause
(user interface) (17)
Green
Status OK
Yellow
Critical temperature has been reached or bat-
tery is almost empty
Illuminated red
Power tool has overheated or battery is empty Allow the power tool to cool down, or replace
Flashing red
Kickback shutdown, restart protection or im-
pact shutdown has been triggered
Flashing blue
Power tool is connected to a mobile device or
settings are being transferred
Connectivity functions
In conjunction with the Bluetooth® Low Energy Module
GCY 30-4, the following connectivity functions are available
for the power tool:
– Registration and personalisation
– Status check, output of warning messages
– General information and settings
– Management
Read the corresponding operating instructions for informa-
tion about the Bluetooth® Low Energy Module GCY 30-4.
Practical advice
In areas in which the Bluetooth® wireless technology
u
must not be used, the GCY 30-4 Bluetooth® Low Energy
Module and the button cell must be removed.
The power tool with inserted Bluetooth
u
Module GCY 30-4 is equipped with a radio interface.
Local operating restrictions, e.g. in aircraft or hospit-
als, must be observed.
Move the grinding tool evenly back and forth with light pres-
sure to achieve an optimum work result. Pressure that is too
strong reduces the performance capability of the power tool
and causes the grinding tool to wear more quickly.
Protect the grinding tools against impact.
u
Recommendations for optimal handling of the battery
Protect the battery against moisture and water.
1 609 92A 5E8 | (04.02.2020)
Only store the battery only within a temperature range of -20
to 50 °C. Do not leave the battery in your car in the summer,
for example.
Occasionally clean the ventilation slots on the battery using a
soft brush that is clean and dry.
A significantly reduced operating time after charging indic-
ates that the battery has deteriorated and must be replaced.
Follow the instructions on correct disposal.
Maintenance and Service
Maintenance and Cleaning
Remove the battery from the power tool before carry-
u
ing out work on the power tool (e.g. maintenance,
changing tool, etc.). The battery should also be re-
®
Low Energy
moved for transport and storage. There is risk of injury
from unintentionally pressing the on/off switch.
To ensure safe and efficient operation, always keep
u
the power tool and the ventilation slots clean.
After-Sales Service and Application Service
Our after-sales service responds to your questions concern-
ing maintenance and repair of your product as well as spare
parts. You can find explosion drawings and information on
spare parts at: www.bosch-pt.com
The Bosch product use advice team will be happy to help you
Solution
–
Replace or charge battery soon
Replace or charge battery
Solution
Run the power tool at no load and allow it to
cool down
Leave the power tool to cool down
Solution
–
Run the power tool at no load and allow it to
cool down, or replace or charge the battery
soon
or charge the battery
Turn the power tool off and on again
–
Bosch Power Tools
Tabla de contenido
