Installation Of Safety Support - Kichler Bead 54 Manual De Instrucciones

INSTALLATION OF SAFETY SUPPORT

(required for Canadian installation ONLY)
Flat Washer
A safety support cable is provided to help prevent the ceiling fan from failing, A safety support cable is provided to help prevent the ceiling fan from failing,
Wood screw
please install it as follows. please install it as follows. Support Brace
Spring Washer
Ceiling
Outlet Box
Step 1. Step 1. Drive a wood screw and washers into the side of the brace that holds Drive a wood screw and washers into the side of the brace that holds
the outlet box. Leave 3mm (1/8") of space between the support brace and the outlet box. Leave 3mm (1/8") of space between the support brace and
the washer. (Fig. 7) the washer. (Fig. 7)
Fig. 7
Step 2. Step 2. Insert the safety cable through the mounting bracket and one of the Insert the safety cable through the mounting bracket and one of the
holes in the outlet box into the ceiling. Adjust the length of the safety cable holes in the outlet box into the ceiling. Adjust the length of the safety cable
to reach the screw and washers by pulling the extra cable through the cable to reach the screw and washers by pulling the extra cable through the cable
clamp until the overall length is correct, put the end of the cable back through clamp until the overall length is correct, put the end of the cable back through
the cable clamp, forming a loop at the end of the cable. Tighten the cable the cable clamp, forming a loop at the end of the cable. Tighten the cable Safety Cable
Bolt
clamp securely. Now, put the loop in the end of the safety cable over the clamp securely. Now, put the loop in the end of the safety cable over the
Wood Screw
wood screw and under the washer. Tighten the wood screw securely. wood screw and under the washer. Tighten the wood screw securely.
(Fig. 8) (Fig. 8)
NOTE: NOTE: Although the safety support cable is required for Canadian Although the safety support cable is required for Canadian
installations only. It's a good idea to make the attachment with any installations only. It's a good idea to make the attachment with any
installation. installation.
Fig. 8
8 | KICHLER.COM