iWatBoard iWatScooter Manual De Usuario página 26

EN
3. INSTALL THE HANDLEBAR
1. Unfold the handlebar holder, then loosen the
quick lock screw by rotating clockwise.
Screw hole
3. Place the handlebar inside the holder as shown,
then fasten the holder and remove the screw.
Screw
Do Not Remove
2. Put the nut and gasket aside, open the holder but
leave the screw.
Keep the gasket
4. Put the nut and gasket back into place and tighten
them, then adjust the position of the handlebar to
complete the install.
26