Window Requirements - GE AEG08 Manual Del Propietario Y Instrucciones De Instalación

Installation Instructions

1. WINDOW REQUIREMENTS

• These instructions are for a standard
double-hung window. You will need to modify
them for other types of windows.
• The air conditioner can be installed without the
accordion panels if needed to fit in a narrow
window. See the window opening dimensions.
• All supporting parts must be secured to firm
wood, masonry or metal.
• The electrical outlet must be within reach of the
power cord.
(With accordion panels)
Model
AEG08, AEN08
AEG10, AEN10,
AEG12
2. STORM WINDOW REQUIREMENTS
A storm window frame will not allow the air
conditioner to tilt toward the outside, and will keep
it from draining properly. To adjust for this, attach
a piece of wood to the sill.
WOOD PIECES
WIDTH: 2
LENGTH: Long enough to fit inside the window
frame.
THICKNESS: To determine the thickness, place
than the top of the storm window frame or the
vinyl frame.
Attach securely with nails or screws provided by
the installer.
than storm
window frame
Storm window frame
49-5000433
A
B
A B
22"- 36"
than vinyl frame
(on some windows)
Wood
Sill
Vinyl frame
3. ATTACH THE TOP MOUNTING
RAIL SEAL STRIP
(This step is for AEW08 models only.)
A.
Remove the backing from the top mounting rail
seal strip and attach the seal strip to the bottom
of the top mounting rail, along the front edge.
FRONT VIEW
Seal strip
B.
Install the top mounting rail with 4 Type A
screws from the outside of the case.
Top mounting rail
Bottom
mounting rail
Top mounting rail
Remove
backing
from seal
strip
Top mounting rail
11