Controls; Remote Control - GE AEG08 Manual Del Propietario Y Instrucciones De Instalación

Controls

Do Not Operate in Freezing Outdoor Conditions
This cool-only air conditioner was not designed for freezing outdoor conditions. It must not be used in freezing
outdoor conditions.
Features and appearance will vary.
Lights next to the touch pads on the air conditioner control panel indicate the selected settings.
Air Conditioner Controls
Power
Auto
High
Med
Low
Fan
NOTE: The display always shows the room temperature except when
setting the Set temperature or the Delay timer.
Power Pad
Turns air conditioner on and off. When turned on,
the display will show the room temperature.
Display
Shows the room temperature or time remaining on
the Delay timer. Shows the Set temperature while
setting the temperature in Cool or ECO modes.
The Set light will turn on while setting.
Temp Increase + /Decrease – Pads
mode. The Set light will turn on while setting.
Fan Speed Pads
Auto on the unit. NOTE: On the remote control,
NOTE: The default temperature reading on the display is degree Fahrenheit ( °F). To change the display to degree
Celcius (°C), press the Temp Increase + and Temp Decrease – buttons together and hold for 3 seconds. Repeat the
process to change back to degree Fahrenheit (°F)
49-5000433
Temp
Cool
Fan
Eco
Mode Sleep WiFi
Cool or ECO
Low, Med, High or

Remote Control

use the fan speed Increase + / Decrease – pads
to set the fan speeds to Low, Med or High
the Auto pad to turn Auto fan on.
Mode Pad
Only mode.
WiFI
Enables connection of the air conditioner to
the home WiFi. Download App for details at
GEAppliances.com/connect
page 17.
5