Cleaning And Maintenance; Storage; Disposal And Recycling; Spare-Part Ordering - Scheppach LB2600E Traducción De Las Instrucciones Originales De Funcionamiento

Please provide the following information in the event
of any enquiries:
• Type of current for the motor
• Machine data - type plate
• Machine data - type plate

11. Cleaning and maintenance

Danger!
Always pull out the mains power plug before starting
any cleaning work.
Cleaning
• Keep all safety devices, air vents and the motor hous-
ing free of dirt and dust as far as possible. Wipe the
equipment with a clean cloth or blow it with com-
pressed air at low pressure.
• We recommend that you clean the device immedi-
ately each time you have finished using it.
• Clean the equipment regularly with a moist cloth and
some soft soap. Do not use cleaning agents or sol-
vents; these could attack the plastic parts of the equip-
ment. Ensure that no water can seep into the device.
• After shaking out the debris bag, turn it inside out
and thoroughly clean it in order to prevent mould and
unpleasant odors from forming.
• You can use soap and water to clean out a heavily
soiled debris bag.
• Rub a bar of dry soap across the zipper teeth if the
zipper becomes difficult to pull.
• Clean the vacuum/blower tube with a brush upon evi-
dence of dirt and grime.
• Dirt and grime can make the switch (blower/vacuum)
more difficult to operate as a result of the material that
swirls up off the ground. When this occurs, simply flip
the switch back and forth a few times, which should
bring it back to the normal feel.
Maintenance
• Should the tool experience problems beyond those
mentioned above, let only an authorized professional
or a customer service shop perform an inspection.
• There are no parts inside the equipment which re-
quire additional maintenance.

12. Storage

Store the equipment and accessories out of children's
reach in a dark and dry place at above freezing temper-
ature. The ideal storage temperature is between 5 and
30 °C. Store the electric tool in its original packaging.

13. Disposal and recycling

The equipment is supplied in packaging to prevent it
from being damaged in transit. The raw materials in this
packaging can be reused or recycled. The equipment
and its accessories are made of various types of mate-
rial, such as metal and plastic. Defective components
must be disposed of as special waste. Ask your
dealer or your local council.
Old devices must not be disposed of with house-
hold waste!
This symbol indicates that this product must not
be disposed of together with domestic waste in
compliance with the Directive (2012/19/EU) per-
taining to waste electrical and electronic equip-
ment (WEEE). This product must be disposed of at a
designated collection point. This can occur, for exam-
ple, by handing it in at an authorised collecting point for
the recycling of waste electrical and electronic equip-
ment. Improper handling of waste equipment may have
negative consequences for the environment and human
health due to potentially hazardous substances that are
often contained in electrical and electronic equipment.
By properly disposing of this product, you
are also contributing to the effective use of natural re-
sources. You can obtain information on collection points
for waste equipment from your municipal administration,
public waste disposal authority, an authorised body for
the disposal of waste electrical and electronic equip-
ment or your waste disposal company.

14. Spare-part ordering

Please quote the following in your order for spare parts:
• Type of device
• Article No. of deviceIdent. No. of device
• Spare Part No. of the required spare part
Service information
Please note that the following parts of this product are
subject to normal or natural wear and that the following
parts are therefore also required for use as consumab-
les.
Wear parts*: Collection bag.
* Not necessarily included in the scope of delivery!
GB
19 І 64