Idiomas disponibles
Idiomas disponibles
TECHNICAL
SERVICE
POINTER
WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before operating.
Failure to do so can result in death or
electrical shock.
Instructions:
PARTS REQUIRED:
W10811358 - Tub Replacement Kit
o Tub Assembly
o Gasket, Center Post
o Instruction Sheet
TOOLS REQUIRED:
5/16" Nut Driver
5/16" Socket and Wrench
7/16 Socket and extension
Phillips Screw Driver
Needle Nose Pliers
Loctite 3035
Spanner nut Wrench
Hammer
SAFETY EQUIPMENT:
Gloves
Sleeves
Safety Glasses
Page 2
® Registered trademark of Whirlpool, U.S.A., KitchenAid, U.S.A., Jenn-Air, U.S.A., or Maytag Properties, LLC or its related companies.
For Immediate Attention of Your Service Department
Technical Service Pointer #: W10804386
Action Required: Mandatory
Release Date: May, 2015
®MAGIC CHEF is a registered trademark of CNA International, used under license. © 2015 All rights reserved.
TUB REPLACEMENT PROCEDURE:
1. Unplug washer or disconnect power.
2. Remove back splash.
Back splash
3. Remove the two (2) 5/16" bolts that attach top.
4. Slide the top forward gently. Lift the back a little
to make sure you don't catch the red retainer
clips. (Ignore that the back splash panel is still
installed in the following picture ...it should have
already been removed in step 2.)
Laundry Products
