STAR Water Systems 148014 1HP Manual De Instrucciones página 9

INSTALLATION:
4. Connect return line from filter to swimming pool
return inlet.
5. Make sure power is off and attach wiring.
before performing any work on the motor.
Refer to instructions for wiring connections.
6. Fill pump and trap with water, replace trap lid
and check system for leaks. If no leaks, proceed
with pump startup.
NOTE: DO NOT START PUMP if any leaks are
present in the system.
After startup check again for leaks again at
each connection.
Always disconnect
pump from electricity
Copyright © 2020. All rights reserved • 95 North Oak Street • Kendallville, IN 46755
4
5
6
9
Return Line
Filter Outlet
Return Line
Goes to Pool Jets
Fuse Box
Fuse Box
Fill Level
IL2562