Uline H-2590 Guia De Inicio Rapido

H-2590
HEAVY DUTY AUTOMATIC
TAPE DISPENSER
Mode Selection
(manual, auto and interval)
1. When using automatic feed, remove the first piece
of tape. The unit will automatically feed and cut the
next piece at the preset length.
2. Feed length can be easily set using thumbwheel
controls.
3. Hold down shaft increases accuracy by maximizing
tape adhesion to the feed rollers.
4. The blade is easy to remove and replace.
5. Optional serrated blade for hard to cut materials.
6. Tape Length Display – Shows preset feed length.
Four-digit display can be set from 50 to 9,999 mm
(2 to 393").
7. Interval Knob – Sets delay time before dispensing
next piece.
PAGE 1 OF 9
1-800-295-5510
uline.com
Hold Down Shaft
(under top cover)
Tape Length Display
Interval Knob
Alarm
FEATURES
Reel Holder
8. Auto/Manual Switch – Toggles operating mode
between manual (press tape advance button
to dispense) and auto (automatic feed and cut
when piece is removed).
9. Power Switch – Press to turn power on and off.
10. Tape Advance Button – Press to feed and cut one
piece of tape to the preset length.
11. Hold Down Shaft – Increases adhesion to feed roller.
12. Reel Holder – 3" core to hold material.
13. Alarm – Lights when there is a malfunction in the unit.
Para Español, vea páginas 4-6.
Pour le français, consulter les pages 7-9.
Tape Advance Button
Cut Button
Power Switch
0621 IH-2590