English; Getting Started; Cleaning And Care - Electrolux ESB23xx PerfectMix Libro De Instrucciones

ENGLISH

Thank you for choosing an Electrolux product. In order to ensure the best results, always use original Electrolux
accessories and spare parts. They have been designed especially for your product. This product is designed with
the environment in mind. All plastic parts are marked for recycling purposes.
COMPONENTS
A. Jug
B. Spout
C. Lid with filler hole
D. Measuring cup
E. Blade assembly, detachable
F. Motor housing
Picture page 2-3

GETTING STARTED

1
Before using the blender for the first time, wash all parts except for the motor housing.
Assembling: Place the rubber seal on the blade assembly. Attach the blender blade assembly to the jug (A). Fix it
firmly by turning it counter-clockwise.
2
Place the blender on a flat surface and lock the jug into position on the motor housing. Put the ingredients in
the jug. (Do not exceed the maximum capacity 1,5 L)
3
Close the lid and (A) insert the measuring cup in the filler hole and (B) lock into position.
Processing hot liquids: Allow hot liquids to cool down until lukewarm before filling the jug. Fill the jug only half
full and start processing on low speed.
4
Start the blender by turning the speed selector to the right. Start at a low speed, then progress to a higher
speed if required. To use the PULSE function, turn the speed selector to PULSE position.
5
Ice crushing: Turn the speed selector to the PULSE position for 3–5 seconds several times until you obtain a
satisfactory result. You can add more ice through the filler hole while the blender is running.
6
To make juice: Insert the filter* before use. Make sure it fits correctly. Add fruits in the filter (do not use the blend-
er to mash large seeds such as those in plums or avocados).

CLEANING AND CARE

7
Remove the lid and jug. Turn the blade assembly clockwise and remove it. Rinse the blade assembly in water
and detergent. Caution! Handle carefully, the blades are very sharp! The lid, jug and measuring cup can be
washed in the dishwasher.
8
Quick cleaning: Pour warm water into the jug and add a few drops of detergent. Mix water and detergent by
turning the speed selector briefly to the PULSE position. Rinse the jug under running water.
9
Thorough cleaning: Turn the blender off and unplug the power cord. Wipe the motor housing with a damp
cloth. Never immerse the motor housing in water or clean it under running water!
Enjoy your new Electrolux product!
www.electrolux.com
ESB23XX_Blender_Electrolux_No-Farsi.indd 6
G. Speed selector
H. Cord storage device (underside of appliance)
I. Non-slip feet
J. Filter *
* Certain models only
6
2017-07-13 14:29:01