Safety Tips; Introduction; Pack Contents - Buffalo CC036 Manual De Instrucciones

UK

Safety Tips

• Mount on a suitable surface.
• A service agent/qualified technician should carry out installation and any repairs if required. Do not
remove any components on this product.
• Consult Local and National Standards to comply with the following:
• Health and Safety at Work Legislation
• BS EN Codes of Practice
• Fire Precautions
• IEE Wiring Regulations
• Building Regulations
• DO NOT immerse the appliance in water.
• DO NOT touch the appliance when in use. Surfaces are hot!
• DO NOT obstruct or cover the appliance in any way when in use.
• DO NOT use an extension cable to power the appliance.
• DO NOT handle the bulb with bare hands - wear suitable gloves.
• Ensure the mains cable does not come into contact with the outer casing of the appliance.
• Always switch off the appliance, disconnect the power supply and allow to cool before cleaning or
changing/ removing parts.
• Always switch off and disconnect the power supply to the appliance when not in use.
• Keep all packaging away from children. Dispose of the packaging in accordance to the regulations of
local authorities.
• If the power cord is damaged, it must be replaced by a BUFFALO agent or a recommended qualified
technician in order to avoid a hazard.

Introduction

Please take a few moments to carefully read through this manual. Correct maintenance and operation of
this machine will provide the best possible performance from your BUFFALO product.

Pack Contents

The following is included:
• BUFFALO Heat Lamp
• Nut x 2
• Bolt x 2
• Washer x 2
BUFFALO prides itself on quality and service, ensuring that at the time of packaging the contents are
supplied fully functional and free of damage.
Should you find any damage as a result of transit, please contact your BUFFALO dealer immediately.
1
• Spring Washer x 2
• Shakeproof Washer x 2
• Instruction Manual