Carton Contents - SNOWJOE SUNJOE CJ602E Manual De Instrucciones

Unpacking

Carton Contents

• Electric wood chipper + shredder main body with hopper
• Electric wood chipper + shredder stand assembly
• Paddle holder
• Paddle
• Wheel axle with hardware
• Wheels (2)
• Shredder stand assembly washers and screws (2)
• Wrench
• Hex key
• Manual with registration card
1. Carefully remove the electric wood chipper + shredder and
check to see that all of the above items are supplied.
2. Inspect the product carefully to make sure no breakage or
damage occurred during shipping. If you find damaged or
missing parts, DO NOT return the unit to the store. Please
call the Snow Joe + Sun Joe
®
1-866-SNOWJOE (1-866-766-9563).
NOTE: Do not discard the shipping carton and packaging
material until you are ready to use the electric wood
chipper + shredder. The packaging is made of recyclable
materials. Properly dispose of these materials in
accordance with local regulations or save the packaging
for long-term product storage.
IMPORTANT! The equipment and packaging material are
not toys. Do not let children play with plastic bags, foils,
or small parts. These items can be swallowed and pose a
suffocation risk!
Assembly
Wheels Fitting
NOTE: The hardware for the wheels are already assembled on
the wheel axle.
1. Remove all the wheel spacers and nuts on the wheel axle,
and remove the shaft sleeve and support cover on one
side of the wheel axle (Fig. 1).
Fig. 1
Nut
Spacer Shaft sleeve
customer service center at
®
Wheel axle Nut
Spacer
2. Insert the wheel axle into the shredder stand assembly,
and re-assemble the shaft sleeve and the support cover
(Fig. 2).
Fig. 2
Shaft sleeve
Stand
assembly
3. Remove the wheel cover from the wheel (Fig. 3).
Fig. 3
Wheel cover
4. Assemble the wheel on the end of the wheel axle, fix it
with the spacer and the nut (Fig. 4).
Fig. 4
Wheel axle
5. Press the wheel cover into the wheel to cover the end of
the axle. You may use a hammer to seat them securely
over the axle. There may be some clearance between the
wheel and the wheel cover, it is not necessary to press it
to the bottom (Fig. 5).
7
Wheel axle
Shaft
sleeve
Wheel
Wheel
Spacer
Nut