Installation - Glacier bay 35644BNHD Guía De Uso Y Cuidado

Installation (continued)
1
Connecting the 7/8 in. mounting
bracket
NOTE: The flat side of the FRONT 7/8 in. diameter tube
assembly (C) should be facing down.
NOTE: The flat side of the REAR 7/8 in. diameter tube
assembly (C) should be facing down.
□ With the arrows on the mounting bracket for the 7/8 in.
diameter tube (B) pointing up and down, fasten the 7/8 in.
diameter tube assemblies (C) to the mounting bracket for
the 7/8 in. diameter tube (B) using mounting bracket
screws (BB) and threaded inserts (CC). Tighten using the
large hex wrenches (EE).
2
Connecting the 1 in. mounting
bracket
NOTE: The flat side of the FRONT 1 in. diameter tube (D)
should be facing down.
NOTE: The flat side of the REAR 1 in. diameter tube (D)
should be facing down.
□ With the arrows on the mounting bracket for the 1 in.
diameter tube (A) pointing up and down, fasten the 1 in.
diameter tubes (D) to the mounting bracket for
the 1 in. diameter tube (A) using mounting bracket
screws (BB) and threaded inserts (CC). Tighten using the
large hex wrenches (EE).
diameter tube (D)
rear 1 in.
D
front 1 in.
diameter tube (D)
5
CC
B
C
front 7/8 in. diameter
tube assembly (C)
BB
CC
A
BB
rear 7/8 in. diameter
tube assembly (C)