Cybex Platinum SOLUTION Z-FIX Guía De Usuario página 7

Ocultar thumbs Ver también para SOLUTION Z-FIX:
Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 31
CERTIFICATION
UN R44/04, age group 2/3
CYBEX Solution Z-Fix
Weight: 15-36 kg
Recommended from approx.
3 years to 12 years
Riedingerstr. 18, 95448 Bayreuth
Thank you for deciding on the Solution Z-Fix when choosing your child seat.
Carefully read this user guide before installing the car seat in your vehicle and
always keep it to hand in the designated user guide storage compartment (a).
IMPORTANT INFORMATION
Without the approval of the Type Approval Authority, the child seat may not be
modified or added to in any way.
In order to keep your child properly protected, it is absolutely essential that
you use the child seat as described in this manual.
This child seat may only be installed on vehicle seats which are approved for
the use of child restraint systems according to the vehicle manual.
Only suitable for vehicle seats with automatic three-point belts approved in
accordance with UN regulation 16 or a comparable standard.
Do not use any load bearing contact points other than those described in the
instructions and marked on the child restraint.
The full surface of the backrest of the child seat must make contact with the
backrest of the vehicle.
The shoulder belt must run upwards and back at a recline. It must never run
forward to the upper belt point in your vehicle.
The vehicle belt buckle must never cross the belt guide of the seat. If the belt
whip is too long, the child seat is not suitable for use in this position in the
vehicle. In case of doubt please contact the child restraint manufacturer.
The three-point vehicle belt must only be passed through the designated
routings. The belt routings are described in detail in this manual and are
marked in red on the child seat.
The lap belt must run as low as possible across your child's groin to have
optimum effect in the event of an accident.
Before each use make sure that the automatic three-point vehicle belt is
correctly adjusted and fits tightly to the child's body. Never twist the belt!
SOLUTION Z-fix
UN-R44-04
UNIVERSAL
SEMI-UNIVERSAL
15 – 36 kg
04301360
CYBEX GmbH
Germany
Only an optimally adjusted headrest can offer your child maximum protection
and comfort while ensuring that the shoulder belt can be fitted smoothly.
The child seat must always be secured correctly with the vehicle belt in the
vehicle even when not in use.
Always ensure that the child seat is never jammed when closing the car door
or adjusting the back seat.
The child seat is also tested and homologated without the Linear Side impact
Protectors.
Luggage or any other objects present in the vehicle must always be firmly
secured. Otherwise, they may be thrown within the car, which could cause
fatal injuries.
The child seat must never be used without the seat cover. Ensure that only
an original CYBEX seat cover is used, as the cover is a key element of the
seat's function.
Never leave your child unattended in the car.
The parts in the child restraint system heat up in the sun and could potentially
burn your child's skin. Protect your child and the child seat from direct sun
exposure.
An accident may cause damage to the child seat that is not identifiable with
the naked eye. Please replace the seat after an accident. In case of doubt,
please consult your dealer or the manufacturer.
Do not use this child seat for more than 9 years. The child seat is exposed to
high stress during its product life span, which leads to changes in the quality
of the material with increasing age.
The plastic parts can be cleaned with a mild cleaning agent and warm water.
Never use harsh cleaning agents or bleaches!
On some vehicle seats made of sensitive materials, the use of child seats
may leave marks and/or cause discolouration. To prevent this, you can place
a blanket or towel or similar underneath the child seat to protect the vehicle
seat.PRODUCT PARTS
EN
5
Tabla de contenido
loading

Tabla de contenido