Charging The Power Bank; Led Display - Silvercrest SPBD 5000 A1 Instrucciones De Uso

Returning the packaging to the material cycle conserves raw
materials and reduces the amount of waste that is generated .
Dispose of packaging materials that are no longer needed in
accordance with applicable local regulations .

Charging the power bank

Before using the power bank, the integrated battery must be
fully charged .
► Due to the high battery capacity and bearing in mind the
charging time, the power bank must be charged using a
USB power adapter .
► Use only a USB power adapter with an output voltage of
5 V and an output current of at least 2 .1 A to charge the
power bank .
► Charging takes about 3 hours .
♦ Connect the USB plug of the charger cable
USB power supply (not supplied) .
♦ Connect the micro-USB plug on the charging cable
the micro-USB charging port (IN)
The current charge level is shown during charging by
means of the charge level LEDs

LED display

One LED is flashing
SPBD 5000 A1
to suitable
on the power bank .
:
Charge level
< 20%
US-EN
to
11 ■
│