Esp Function - LG PQRCFCS0 Manual De Instalación Y Propietario

Necessary function before using

ESP Function

E.S.P function is setting the volume of each Fan speed. It is for the convenience of installation. It is
recommended that you should not use this function whild using the remote controller.
PQRCFCS0
Defrost Preheat Out door
ROOM FAN
TEMP SPEED
* The E.S.P value is set at the proper value at the factory. So it is highly recommended that you should do not
change the E.S.P value at your discretion.
10 Simple Wired Remote Controller
All manuals and user guides at all-guides.com
1
2
Room Temp
Total on
Central Run
3
4
EX)
200
Press the Room Temperature button and Temperature
incrreasing button at the same time for three
seconds
Set the volume of each Fan speed(Low, Medium, Hi)
by using the temperature control button. Press the Fan
speed button to select the Fan speed.
The value of E.S.P could be adjusted from 1 to 255.
If you press the Off button while setting the ESP
function, it will be canceled. (The picture on the left
side is the example of setting the Hi wind to ESP 10.)
Press the Room Temperature button and the
temperature increasing button ( ) at the same time for
three seconds. Then the ESP setting will be activated
after the temperature display flashes three times.
Lo
100
Setting the Low wind to 210
Med
Setting the Medium wind to 175