Important Safety Instructions; Additional Safety Instructions - Fanimation SHOWROOM BREWMASTER FP1280 220 Serie Manual Del Usuario

WARNING: To avoid fire, shock and serious personal injury, follow these instructions.
1. Read your owner's manual and safety information before installing your new fan. Review
the accompanying assembly diagrams.
2. Before servicing or cleaning unit, switch power off at service panel and lock service panel
disconnecting means to prevent power from being switched on accidentally. When the
service disconnecting means cannot be locked, securely fasten a warning device, such as a
tag, to the service panel.
3. Be careful of the fan and blades when cleaning, painting, or working near the fan. Always
turn off the power to the ceiling fan before servicing.
4. Do not insert anything into the fan blades while the fan is operating.
5. Do not operate reversing switch until fan blades have come to a complete stop.
6. Do not dispose of electrical appliances as unsorted municipal waste, use separate collec-
tion facilities.
7. Contact your local government for information regarding the collection systems available.
8. If electrical appliances are disposed of in landfills or dumps, hazardous substances can
leak into the groundwater and get into the food chain, damaging your health and well-being.
9. When replacing old appliances with new once, the retailer is legally obligated to take back
your old appliance for disposal at least for free of charge.
10. This appliance is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge, unless they
have been given supervision or instruction concerning use of the appliance by a person
responsible for their safety. Children should be supervised to ensure that they do not play
with the appliance.
1. To avoid possible shock, be sure electricity is turned off at the fuse box before wiring, and
do not operate fan without blades.
2. All wiring and installation procedures must satisfy National Electrical Codes and Local
Codes. The ceiling fan must be grounded as a precaution against possible electrical shock.
Assembled and installed installation shall be made or approved by licensed electrician.
3. The fan base must be securely mounted and capable of reliably supporting at least 15.9kg
(35 lbs). See page 6 of owner's manual for support requirements.
4. CAUTION: To reduce the risk of personal injury, mount the fan base to a ceiling joist or
structural member using the hardware provided with your fan.
WARNING: Support Directly from Building Structure.
WARNING: The fan cannot be installed on a sloped ceiling.
5. The fan must be mounted at least 2.3 m from the floor to prevent accidental contact with
the fan blades.
6. Follow the recommended instructions for the proper method of wiring your ceiling fan.
7. Do not use the Solid-State speed control.
WARNING: To reduce the risk of fire or electric shock, this fan should only be used with Fan
Speed Control Part No. C3-220, manufactured by Rhine Electronic Co., Ltd.
WARNING: TO REDUCE THE RISK OF SHOCK, THIS FAN MUST BE INSTALLED WITH
AN ISOLATING WALL CONTROL/SWITCH.
WARNING: This product is designed to use only those parts supplied with this product and/or
accessories designated specifically for use with this product. Using parts and/or accessories
not designated for use with this product could result in personal injury or property damage.
WARNING: To reduce the risk of personal injury, do not bend the blade bracket (flange or
blade holder) when installing the brackets, balancing the blades, or cleaning the fan. Do not
insert foreign objects in between swing fan blades

Important Safety Instructions

Additional Safety Instructions