Change The Phone Covers; Create Custom Back Cover - Nokia 3220 Guia De Inicio Rapido

3220.ENESv2_BIL_9236733.book Page 17 Thursday, November 18, 2004 10:07 AM

• Change the phone covers

Note: Before removing the
cover, always switch off the power
and disconnect the charger and
any other device. Avoid touching
electronic components while
changing the covers. Always
store and use the device with
the covers attached.
1 Remove the back cover from the
phone as described in "Remove the
back cover and battery" on page 12.
2 Beginning at the top of the phone (1),
gently pull the front cover away from
the phone and detach it (2).
3 To remove the key mat from the front
cover, take it out gently.
4 Place the key mat in the new front
cover (3).
5 To replace the front cover, press it
gently onto the phone until it snaps
into position (4).
6 Align the top of the back cover with the
top of the phone (5), and press the
bottom of the back cover to lock it (6).

• Create custom back cover

Note: Use normal, plain paper as found in standard printers or use a
photo print that is not thicker than 0.3 mm. To avoid affecting the
antenna performance the material must not contain metal particles.
Use the plastic stencil to
create a cut-out cover
using your own design.
1 Place the stencil in the
correct position and
draw the outline (1).
2 Carefully cut out your
new cover (2).
Tip: The image editor within Nokia PC Suite provides a tool to create
cut-out covers.
Nokia 3220 User Guide
About your phone
17
Copyright © 2004 Nokia