Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Discard
plaster guard
Valve Stem
with dome.
Faceplate
Screws
Notch
Graphics Ring
Sleeve
4. Install the Faceplate and Handle
NOTICE: For K-2971-KS valve: The thin wall installation kit (88526)
is required for fiberglass or acrylic installations.
Remove and discard the plaster guard and/or dome, if installed.
Rotate the valve stem fully counterclockwise to the "OFF"
position.
Install the faceplate onto the valve so the notch is to the bottom
and secure with screws. Do not overtighten the screws.
Install the graphics ring to the faceplate, and rotate it clockwise to
lock it in place.
Fit the sleeve onto the valve.
Lever Handle
Position the handle so the lever is downward and press the
handle on the valve stem.
Secure with a lock washer and screw.
Press the cap on the knob so the dot is downward.
Round Handle
Position the knob on the valve stem and secure with a lock
washer and screw.
Install the grip ring and O-ring to the knob.
Kohler Co.
Valve Stem
Lever Handle
Screw
Knob
Grip Ring
Lock Washer
O-Ring
5
Lock Washer
O-Ring
Cap
085723-2-AF
Tabla de contenido
