Check Tiller Transmission Grease; Check Tyre Pressure; Lubrication - MADER HHGT-001B Manual Del Usuario

CHECK TILLER TRANSMISSION GREASE

Check the grease level annually. To check the grease level:
1. Move the tiller to level ground.
2. Remove the grease level dipstick located between the handlebar mounts on the engine
mount. If the grease level couldn't touch the dipstick, please re-fill the grease container.
3. Replace the grease level dipstick in the filler hole.
4. Note that the front wheel transmission and rear tine transmission have one common
reservoir. When you add to the front transmission, you must wait for a short period of time
for the grease to flow rearward and equalize in both front and rear. The dipstick will read
correctly on level ground for both gear units.
IMPORTANT!
Tiller transmissions are shipped from factory with the proper amount of liquid
grease.
When replacing grease, the tiller transmission holds 18 – 22 ounces. Do not overfill.

CHECK TYRE PRESSURE

Recommended tyre pressure is 20 PSI. If tires do not have equal pressure, tiller will pull to one side.

LUBRICATION

Proper lubrication of moving mechanical parts is critical for proper care and maintenance. Oil the
moving parts shown at 10 hour intervals using a 30 weight oil.
87