Assembly Instructions; Step 1: Install The Depth Regulator - MADER HHGT-001B Manual Del Usuario

ASSEMBLY INSTRUCTIONS

The tiller comes fully assembled except for a few parts. The following instructions will help you
assemble and adjust the tiller's depth regulator, cable tension, and handlebar height. You will need
two 9/16" wrenches to complete the assembly.

STEP 1: INSTALL THE DEPTH REGULATOR

1. Install the depth regulator into the top of the depth regulator Bracket with handle facing
rearward.
2. Insert depth regulator pin through depth regulator bracket and top hole of depth regulator-
tines should clear the ground.
73