Little Giant Project Tray Guia De Inicio Rapido

The Project Tray is a great addition to the Little Giant family. The Project
Tray enables you to do a wide variety of jobs with features for just about
everything you need, including the following:
• Oversized dish for screws, nuts, bolts, etc.
• Drill holder
• Fitted trays for all standard paint can sizes, including quart and gallon
(round and square)
• Screwdriver holes
• Slot for putty knives and speed square
• Drink holder
• Slotted holes for wrenches, extension cords, and Tool Bungees
Operating the Project Tray
Use the Project Tray on your Little Giant Ladder in the A-frame position.
To attach the Project Tray to your ladder, please follow these steps:
1. Place the Project Tray hooks on the rung below your desired
platform height and place the lip of the tray over the next rung up.
(see Figure 1)
2. Ensure the Project Tray is secure before putting tools on it. (see
Figure 2)
3. When you are finished using the Project Tray, simply fold it and
store it inside ladder (see Figure 3)
Figure 1 Figure 2
Warning: Do not exceed max weight of 25 lbs.
Warning: Do not sit or stand on the Project Tray
Little Giant Ladder Systems
1198 N. Spring Creek Place
Springville, UT 84663
www. LittleGiantLadders.com
PROJECT TRAY
Figure 3
Toll Free: 800-453-1192
Phone: 801-489-3684
Fax: 801-489-3685
TOOL BUNGEE INSTRUCTIONS
Standard use
tie an overhand knot
LITTLE GIANT PROJECT TRAY WARRANTY
Little Giant Ladder Systems™ warrants each new Project
Tray to original purchaser thereof, to be free from defects in
workmanship and materials when operated under normal
conditions and maintained properly. This warranty covers all
parts of the Project Tray.
This warranty shall be in effect for a period of one year from
date of purchase. This shall be in lieu of any other warranty,
expressed or implied, including, but not limited to, any implied
warranty of merchantability or fitness for a particular purpose.
Certain states do not allow limitations on how long an implied
warranty lasts. The above limitation may not apply.
Little Giant Ladder Systems will repair or replace, at its option
and without cost to the original purchaser, any Project Tray
which has been found defective and is within the period of
warranty. All freight to and from the factory is to be paid by the
customer. The factory address is: Little Giant Ladder
Systems, 1198 N. Spring Creek Place, Springville, Utah
84663.
The liability of Little Giant Ladder Systems under this warranty
shall be limited solely to repair or replacement of the Project
Tray within the warranty period. Little Giant Ladder Systems
shall not be liable, under any circumstances, for consequen-
tial or incidental damages, including, but not limited to,
personal injury or labor costs. Some states do not allow the
exclusion or limitation of incidental or consequential damages,
so the above limitations or exclusions may not apply to you.
This warranty gives the original purchaser specific legal rights,
and you may have other rights which vary from state to state.
Under no circumstances will Little Giant Ladder Systems be
responsible for any expense in connection with any repairs
made by anyone other than the factory or authorized service
station unless such repairs have been specifically authorized
in writing by Little Giant Ladder Systems.
For extra tension