Safety Instructions - Blumfeldt Heat Square Slim Manual Del Usuario

EN
14

SAFETY INSTRUCTIONS

• Read all instructions before using this unit.
• Do not leave this unit unattended when in use.
• This heater will get hot when in use. Do not touch hot surfaces.
CAUTION
Risk of burns! Some parts of this product can become very hot
and cause burns. Particular attention has to be given when
children and vulnerable people are present.
• Do not move the unit when in use. Wait until the heater is completely
cool before moving and check that it has been unplugged from the power
supply.
• Position the unit at least 1 m away from highly combustible materials such
as furniture, trees, leaves, dry grass and bushes.
• The heater must not face with the heating element pointing upwards
towards a ceiling. The heater element must be facing the area it is to heat.
Note: In order to avoid overheating do not cover the heater. It is not for
drying clothes.
• Keep children and pets at a safe distance from the unit.
• This device may be only used by children 8 years old or older and persons
with limited physical, sensory and mental capabilities and / or lack of
experience and knowledge, provided that they have been instructed in
use of the device by a responsible person who understands the associated
risks.
• Children shall not play with the appliance. Cleaning and user maintenance
shall not be made by children without supervision.
• Do not operate the heater if any signs of damage or malfunction manifest
themselves.
• Do not attempt to repair or adjust any electrical or mechanical functions
on this unit. The unit does not contain any user serviceable parts. Only a
qualifi ed electrician should perform servicing or repairs.
• If the power cable is damaged, it must be replaced by the manufacturer, its
service agent or similarly qualifi ed persons in order to avoid a hazard.
• Do not handle the element with bare hands. If it is inadvertently touched,
remove fi nger marks with a soft cloth and methylated spirits or alcohol,
otherwise the marks will burn into the element causing premature heater
failure.