Pty Function - AMS CT412 BT El Manual Del Propietario

Button Tips
RDS
AF (Alternative Frequency): When the radio
signal strength is poor, enabling the AF
function will allow the unit to automatically
search another station with the same PI,
but with stronger signal strength.
PS (Program Service name): The name of
station will be display instead of frequency.
Press 2 seconds the [DSP] button and
select [ / ] to set AF/TA/REG, rotate the
[VOL] knob to open or close AF/TA function.

PTY function

Hold the [SRC] button to PTY function, rotate
the [VOL] knob, display NEWS and POP
program type.
Press 2 second "SRC" button and rotate
the volume knob to choose the type of
station NEWS-AFFAIRS-INFO-SPORT-
EDUCATEDRAMA-CULTURE-SCIENCE-
VARIED-POPM-ROCK M-EASY M-LIGHT
M - C L A S S I C S - O T H E R M - W E AT H E R
-FINANCECHILDREN-SOCIAL -RELIGION-
P H O N E I N - T R AV E L - L E I S U R E - J A Z Z -
C O U N T R Y N AT I O N M - O L D I E S - F O L K
M-DOCUMENTTEST-ALARM
REG on: AF function will implement the
regional code (of the PI) and only stations in
the current region can be tuned automatically.
REG off: AF function will ignore the regional
code(of the PI) and stations in the other
regions can also be tuned automatically.
CT ON/OFF
While listening an FM RDS station, transmitter
updates automatically time on the radio unit
BT Audio
To listen to audio from a bluetooth device and
control playback with the unit.
1. Press SRC button repeatedly to select BT
MUSIC mode.
2. To play or pause, press 1 ( TOP).
VOL LAST mode
Rotate the knob to choose VOL LAST or ADJ
mode.
On the ADJ mode, rotate the knob to adjust
S-VOL 5-30.
BEEP mode
Rotate the knob to choose button beep sound
on or off.
SCROLL mode
Rotate the knob to choose SCROLL (ID Tag)
mode on or off.
SWRC function
This function allows to control main functions
of the radio ((VOL-/VOL+ /Source /SEEK+/
SEEK-/Tune Memory /BT-OFF hang off) in
USB/BT/A2DP/AUX.
To do so, you need a wired remote to connect
to the female input 3.5, yellow connector at
the back of the radio.
Timer ON/Timer OFF
Timer ON: when ignition of the car is off, you
can turn the unit on by pressing POWER
buttion, and it can work for about 2 hours
Timer OFF: when ignition of the car is off, the
unit can't work anymore.
AREA SEL mode
EN-5
Press DSP button more than 2 seconds, then
press [ / ] button several time to choose
REGION funtion. Rotate the konb to choose
"EUROPE--USA--JAPAN- AUSTRA-LATIN".
LOUD ON/OFF
Press SEL and rotate VOL knob to EQ OFF,
then press [ / ] button several time to
choose LOUD ON/OFF funtion. Rotate the
konb to choose loudness on or off .
STEREO/MONO mode
(in Radio mode)
Press DSP button more than 2 seconds, then
press [ / ] button several time to choose
ST/MONO funtion. Rotate the knob to choose
FM stereo or mono.
LOCAL ON/OFF mode (OFF=DX)
Press DSP button more than 2 seconds,
then press [ / ] button several time to
choose LO/DX. Rotate the knob to choose
tuner sensitivity local or distant.
MIC
I n D e f a u l t s e t t i n g s , t h e M I C S E L i s
"REAR"The micro cables are connected at
the rear of the radio, if you don't use the rear
micro, please let them connected to don't
lose them.You can use the front micro but it's
not recommended.On the non time display
menu:
Hold the [DSP] to enter the system setup
menu, and press [ / ] button to select
"MIC SEL and select "FRONT" if you do not
use the back microphone