Uline H-2304 Manual Del Usuario
Ocultar thumbs Ver también para H-2304:
Idiomas disponibles

Idiomas disponibles

Enlaces rápidos

H-2304
MANUAL STRETCH
WRAP MACHINE
IMPORTANT!
Read this manual thoroughly and familiarize
yourself with ALL controls and operating
features. Keep this manual for future reference
and maintenance.
Unpacking: Check the machine for damage.
If damage is found, return to Uline.
MACHINE DIMENSIONS
Length
Width
Height
Turntable Height from Floor
Maximum Load Size
Operation Space
Shipping Weight
ELECTRICAL SPECIFICATIONS
• 120VAC, 60 Hz, Single-phase, 15 AMP
TURNTABLE SPECIFICATIONS
• 1/2 HP 3-phase AC motor
• 1/2 HP AC frequency drive with acceleration and
deceleration control
• 12 RPM turntable maximum speed
• 4,000 lbs turntable maximum load capacity
PAGE 1 OF 18
1-800-295-5510
uline.com
SYSTEM SPECIFICATIONS
FILM ROLL CAPACITY
95"
60"
94"
3⁄"
52" x 52 x 80"
105" L x 75" W
1,000 lbs
Pour le français, consulter les pages 13-18.
• 12-18" width hand wrap film with 3" inner
diameter core
• 1,000-2,000' length depending on film gauge and
film manufacturer
CAUTION! Motor control equipment and
electronic controllers are connected to
hazardous line voltages. When servicing
drive and controllers, there may be exposed
components with housings or protrusions at or
above line potential. Extreme care should be
taken to protect against shock.
The user is responsible for conforming to all
applicable code requirements with respect
to grounding all requirements. Do NOT use
extension cords to operate the equipment.
Disconnect AC input power before checking
components, performing maintenance,
cleaning up, and when the machine is not in
use. Do NOT connect or disconnect wires and
connectors while power is applied to circuit.
Wiring work should be carried out only by
qualified personnel. There is a danger of
electric shock or fire.
WARNING! Loose clothing must NOT be worn
while the machine is in operation. Stay clear of
moving parts while the machine is running.
Para Español, vea páginas 7-12.
0321 IH-2304
Tabla de contenido
loading

Resumen de contenidos para Uline H-2304

  • Página 7: Máquina Manual Para Película Elástica

    Desempacar: Verifique que la máquina no esté ¡CUIDADO! El equipo de control del motor y los dañada. Si lo está, regrésela a Uline. controladores electrónicos están conectados DIMENSIONES DE LA MÁQUINA a líneas de voltaje peligrosas. Cuando se le dé...
  • Página 8: Descripción Del Sistema

    DESCRIPCIÓN DEL SISTEMA Diagrama 1 Caja Eléctrica Torre Carro para Película Plataforma Giratoria CONFIGURACIÓN DEL SISTEMA COLOCACIÓN DE LA MÁQUINA TOLERANCIA DE LA RESISTENCIA DEL PISO Coloque la máquina de película elástica cerca El piso debe ser apto de soportar el peso de la del área donde estará...
  • Página 9: Configuración De La Máquina

    CONFIGURACIÓN DE LA MÁQUINA NOTA: Para disminuir el daño durante el envío, la 3. Apriete los 5 pernos utilizando una llave de 9/16". torre viene separada del armazón y de forma Desenvuelva la máquina y lea el manual operativo horizontal. Para parar la torre, se necesitan dos para utilizarla.
  • Página 10: Controles Operativos

    CONTROLES OPERATIVOS Terminales de Entrada de Línea CA Conexión a Tierra R/L1 S/L2 T/L3 Pantalla LED Arriba/Abajo Avanzar/Parar Tecla de Función MODE RESET de Pantalla Tecla de Confirmación ENTER Perilla para STOP de Información Ajustar Frecuencia NFX 9000 MIN. MAX. 0.5 HP Capacidad del Motor 230V...
  • Página 11: Funciones Programables

    FUNCIONES PROGRAMABLES NOTA: Lea el manual del fabricante o vaya a su • 2-00 – Comando de Fuente de Frecuencia sitio de internet para obtener listas completas y Es utilizado para ajustar el variador para seguir los explicaciones. comandos desde el teclado o un control de entrada con señal externa.
  • Página 12: Guía De Solución De Problemas

    Ajuste o reemplace el cableado de ser necesario. Reemplace el variador de frecuencia de la plataforma giratoria. 800-295-5510 uline.mx PAGE 12 OF 18 0321 IH-2304...

Tabla de contenido