SUNTEC Heat Safe 1000 Manual De Instrucciones página 18

Warning: In order to avoid overheating, do not
cover the heater!
Installation
•
Components:
•
Installation of radiator feet:
Turn the appliance upside down on a carpet or similar
surface to prevent damage to the paint and your floor.
The wheel base will now be connected to the utmost
radiator fin with help of the u-shaped bolt. Place the
u-shaped bolt with its open end under the radiator fin.
The radiator should be surrounded by the wheel base
on top and by the u-shaped bolt from the bottom.
A: Radiator fin
B: Handle
C: Thermostat control (min – max)
D: Indication lamp
E: Power rotary switch
F: Humidifier
G: On-/Off-Switch for humidifier
H: Cable cord storage
I: Radiator foot
J: Wheels
Note: For the models Heat Safe 1000 and
1500 humid, the wheels must first be
attached to the bolts of the radiator feet with
a lot of force until they lock with a "click"
sound.
Please insert the angled end of the u-shaped
bolt into the utmost left hole of the wheel
base. Hold both parts tight.
Put the open end of the u-shaped bolt
through the utmost right hole of the wheel
base and screw it tight from the top.