Every Year Or 1000 Hours Of Operation; Oil Requirements; Oil Capacity - Autoquip P-25-005 Manual De Instalación, Operación Y Servicio

6.2.3 Every Year or 1000 Hours Of Operation

•
Change oil and clean reservoir. Always use clean fluid. Never return fluid from drip pans, pit,
etc. back to reservoir. Dispose of and handle used fluid as a hazardous material.
•
If noise or vibration has been noticed, remove lift cylinder pins, pivot pins, and roller bearings.
Inspect for wear and replace as necessary.
•
Inspect all hydraulic hoses, replace any that show signs of wear or leaking.
•
Replace all filters.
•
Check for permanent mechanical deformation.

6.2.4 Oil Requirements

Follow recommendations below that apply to your application.
Environment (Ambient Temperature)
Indoor locations with variable temperatures:
30 - 100 degrees F.
Indoor locations with constant temperatures:
60 - 80 degrees F.
Outdoor locations: 30 - 120 degrees F.
Outdoor locations: 10 degrees F below 0 to
100 degrees F.
Cold Storage Warehouse: 10 - 40 degrees F.
Note: All oils are detergent type.

6.2.5 Oil Capacity

Oil capacity varies between models.
NOTICE
Use approved fluids only. Use of unauthorized fluids may cause damage
to seals and hosing.
Do Not Use:
•
Automatic Transmission Fluid (ATF)
•
Hydraulic Jack Oil
•
Hydraulic Fluids
•
Brake Fluids
•
•
Recommended Oil
5W 30 or 5W 40 Multiviscosity Motor Oil
Permissible to use SAE 20 Motor Oil
5W 30 or 5W 40 Multiviscosity Motor Oil
5W 20 or 5W 30 Multiviscosity Motor Oil
Contact local Autoquip Service Rep.
24