Mopar 82210888 Serie Instrucciones De Instalación página 5

d. Route the ground wire underneath the TIPM mounting bracket
to the factory ground lug located at the rear of the driver's side
fender.
e. Using a 10 mm socket, remove the factory ground lug.
f. Insert the hood pin switch ground ring terminal over the
10 mm bolt and reinstall into the fender.
g. Route the remaining Violet/White wire from the hood
switch harness underneath the TIPM mounting bracket and
upwards towards the "I" connector.
Factory Ground
TIPM Mounting
Bracket
5 of 11
TIPM Mounting
Bracket
Violet/Lt. Blue Wire