Dash Disassembly - Metra Electronics 95-7345B Instrucciones De Instalación

1. Unsnap and remove trim from
around top center to passenger
side dash. (Figure A)
2. Unsnap panel from outside edge of
driver's side dash. (Figure B)
3. Remove two screws from knee
panel and pull top of panel back so
it doesn't overlap the instrument
cluster. (Figure C)
4. Remove two screws from the
driver's side vent trim and remove.
(Figure D)
(Figure A)

Dash Disassembly

(Figure B)
(Figure C)
(Figure D)
95-7345B
5. Remove five screws from
instrument cluster and remove.
(Figure E)
6. Remove four screws from the
climate controls and remove.
(Figure F)
7. Remove six screws securing the
radio trim panel and remove.
(Figure G)
8. Remove four screws securing the
factory radio chassis and remove
it. (Figure H)
Continue to kit assembly
(Figure E)
2
(Figure F)
(Figure G)
(Figure H)