Tabla de contenido
Idiomas disponibles
Idiomas disponibles
A-16 / ENGLISH
SIDE BROOM MAINTENANCE
The side broom moves dirt and debris away from walls or curbs and into the path of the main brushes. Adjust the side broom so that the bristles are contacting the
fl oor from the 10 O'clock (AA) to the 3 O'clock (BB) area shown in Figure 6 when the broom is down and running.
To adjust the Side Broom...
1
The side broom is adjusted simply by turning the Side Broom Height Adjustment Knob (12), clockwise to raise and counterclockwise to lower the side broom.
NOTE: The machine should be stored with the Side Broom in the raised position. The Side Broom should be replaced when the bristles are too worn or they
become ineffective.
To replace the Side Broom...
1
Raise the Side Broom.
2
Remove the three hex Screws (AJ) and Washers (AK) holding the Side Broom (AL) on to the hub and remove the broom.
3
Install the new broom by using the same hardware.
FIGURE 6
A-16 - FORM NO. 56041798 - VacRide
Capítulos
Tabla de contenido
