Braun Silk-epil 3 3380 Manual Del Usuario página 6

Cooling glove for optional skin
cooling
For the first few epilations or if you have
sensitive skin, you can use the cooling
glove (8), recommended by derma-
tologists to help reduce possible skin
irritation.
• Ensure that the gel pack has been in
the deep freezer (***) for at least
2 hours (for convenience you can store
the gel packs in the freezer).
• Insert the gel pack underneath the
cooling glove's transparent foil. Use
only with glove.
• Put transparent (cool) side of the glove
on your leg.
• Start cooling for approximately
30 seconds, longer if needed.
• Epilate the cooled skin area
immediately as described below.
• Repeat cooling and epilating until
completion.
• While epilating, please ensure your
skin is dry.
Important: Apply cooling glove to the
same area for no longer than 2 minutes.
Keep away from sunlight. Do not use gel
pack when damaged. Dispose of in
household waste. Do not use if you are
hypersensitive, allergic to the cold, or if
your skin suffers from sensory
disturbances, when suffering from
cardiac diseases or arterial circulatory
disorders.
How to epilate
• Your skin must be dry and free from
grease or cream.
• Before use, make sure that the epilation
head (2) is clean.
To turn on the appliance, slide up the on/
off switch (4):
Setting «I»: extra gentle
Setting «II»: extra efficient
99941837_SE3380_CEEMEA_S6-80.indd 7 99941837_SE3380_CEEMEA_S6-80.indd 7
When switched on, the switch light illumi-
nates the area to be epilated.
Rub your skin to lift short hairs. For opti-
mal performance, hold the appliance at
a right angle (90°) against your skin and
guide it without pressure against the hair
growth, in the direction of the switch.
The massaging rollers (1) stimulate the
skin before and after the hair is pulled out
for an extra gentle epilation experience.
Leg epilation
Epilate your legs from the lower leg in an
upward direction. When epilating behind
the knee, keep the leg stretched out
straight.
Underarm and bikini line epilation
For this specific application, the sensitive
area cap (7) has been developed as an
optional attachment to be placed on the
epilation head (2).
Please be aware that especially at the
beginning these areas are particularly
sensitive to pain. Therefore, we recom-
mend that you start with switch setting
«I». With repeated usage the pain sensa-
tion will diminish.
Before epilating, thoroughly clean the
respective area to remove residue (like
deodorant). Then carefully dab dry with a
towel.
When epilating the underarm, keep your
arm raised up and guide the appliance in
different directions.
Cleaning
After epilating, unplug the appliance,
remove the massaging rollers and clean
the epilation head (2).
Thoroughly clean the tweezer element
using the cleaning brush dipped into
alcohol. While cleaning, you can turn the
tweezer element manually.
To remove the epilation head, press the
release buttons (3) on the left and right
7
21.06.11 09:26 21.06.11 09:26