Lorell Península LLR60125 Instrucciones De Montaje página 6

Step 2
Attach the Large Support Panel (C) to
the End Panel (B). Make sure that the
3 each Cam Screws on the End Panel
engage with the Cam Locks located
on the Support Panel. With a Phillips
Screw Driver rotate the cam locks 1/2
turn clockwise until snug. DO NOT
OVERTIGHTEN.
Step 3
Attach the Small Support Panel (E) to the
Small End Panel (D). Make sure that the 3
each Cam Screws on the Small End Panel
engage with the Cam Locks located on
the Small Support Panel. With a Phillips
Screw Driver rotate the cam locks 1/2
turn clockwise until snug. DO NOT
OVERTIGHTEN.
Step 4
Attach the Large Support Panel (C)/
End Panel (B) unit to the Table Top (A)
ensuring that the Cam Screws (1) located
in the Table Top (A) properly engage
with the Cam Lock (2). With a Phillips
Screw Driver rotate the cam locks 1/2
turn clockwise until snug. DO NOT
OVERTIGHTEN.
Attach the Small Support Panel (E)/
Small End Panel (D) to the Table Top
(A) ensuring that the Cam Screws (1)
located in the Table Top (A) properly
engage with the Cam Lock (2). With a
Phillips Screw Driver rotate the cam locks
1/2 turn clockwise until snug. DO NOT
OVERTIGHTEN.
LLR60125_87301_Manual.indd 5 LLR60125_87301_Manual.indd 5
Page 5 of 18
3/7/11 10:09 AM 3/7/11 10:09 AM