Sony HVBK-1520 Instrucciones De Instalación página 39

5
Align the SDI (for HVR-1500) or DPR board on which this board
is mounted with the guides on both sides of the HVR-1500/1500A,
and push it firmly in.
To prevent the i.LINK connector cable from being trapped within
the HVR-1500/1500A, pull it out toward the rear panel, and hold
it. Make sure the positioning holes on the connector panel at the
edge of the board engage with the studs on the rear frame.
Studs
Guides
This board positioning hole
This board positioning hole
Notice for customers in Europe
Apply the electromagnetic shielding before replacing the rear
panel.
See "To apply the electromagnetic shielding" (page 45).
Installation 39