Tabla de contenido
Idiomas disponibles
Idiomas disponibles
English
Installation Guide
1. REMARKS
This installation guide is intended for trained personnel and there-
fore does not include basic working steps.
ATTENTION!!!
· Changing the measuring insert: A seal or sticker must be at-
tached (between the housing and housing cover) for approval
reasons.
· The seal on the meter must not be damaged! A damaged seal
will result in immediate invalidation of the factory warranty and
calibration / conformity.
· Make sure you select the correct meter type, nominal load (qp)
and temperature and pressure range.
2. TRANSPORT, STORAGE AND OPERATION
· Water meters are precision devices and must be protected
against impact and vibration!
Meter with protection class IP 54
· The permissible storage and transport temperature is between
–20 °C and +55 °C.
· The water meter can be used for a water temperature of
5 °C – 55 °C.
· Ambient temperatures 10 °C – 40 °C extend the life of the
battery.
WDV / Molliné GmbH · Mönchstraße 11 · 70191 Stuttgart · Tel. 0711 / 35 16 95 - 20 · Fax 0711 / 35 16 95 - 29 · www.molline.de
Tabla de contenido
