Tabla de contenido
Idiomas disponibles
Idiomas disponibles
1.800.561.8187
(Cont'd)
flashing "
" for U.S. Mode or "
ft in
Metric Mode.
5) If you do not want to change the units,
skip to step 6. If you want to change the
units, press
until you reach the
[M1+]
desired units.
6) Press
to begin setting the scale distance.
[SCALE]
The left-most digit will begin flashing.
Press:
[M1+]
to increment the selected digit,
[SUBTRACT/COUnT]
to decrement,
to advance to the next digit,
[SCALE]
to move back one digit.
[MODE]
7) Continue to press
[SCALE]
until all digits
are set and the display returns to zero. The
scale is now stored.
Entering a Custom Scale
1) Press
until
(# being a
[MODE]
#
open
number 1-3) appears in the scale box display.
2) Press
+
[SUBTRACT/COUnT]
"
" will appear in the main display.
roll
3) Press
[SCALE]
again. The annunciator will
begin flashing "
" for U.S. Mode. The
ft in
left-most digit flashes for Metric Mode.
Note: If in Metric Mode, skip to Step 5.
4) If you want to change the units, press
until you reach the desired unit.
[M1+]
Then press the
key to begin
[SCALE]
setting the distance. The left-most digit
will begin flashing.
5) In U.S. mode, the scale will be one inch
equals the distance you entered. In Metric
mode, entered scales are direct ratios.
10 – Scale Master
Classic
®
www.
.com
" for
m
.
[SCALE]
Capítulos
Tabla de contenido
