Leviton HDX Fiber Optic Manual De Instalación Y Funcionamiento página 10

3 INTRODUCTION TO SYSTEM HARDWARE
Cable Management Door (Included with all Frames): The Cable Management Door is
the mounting face for all Cable Management Spools. It also provides access and discrete
screening for all off-frame routing trays.
Rear Trunk Mesh (Part of the Frame): The Rear Trunk Mesh is a grid based mounting
system for trunk cabling at the rear of the HDF3168 Frame. Each Deck has a specific mounting
mesh point to accept Cable Clamp Kits to properly secure fiber trunk cable from either above
or below routing. Routing Guides (Figure 1) provide proper support and guidance for bend
radius compliant installation. Side wall lances (Figure 2) are evenly located for securing of fiber
trunk cabling within the frame.
Figure 1 Figure 2
Cable Clamp Kit: Cable Clamp Kits (Figure 3) are adjustable mounting brackets that provide
protection and ease of mounting trunk cabling to the Frame. One complete Clamp Kit is
provided with each deck. One additional Cable clamp kit #F3168-CCK (mounting clamp and
grommet only) can be added to each mounting bracket.
Figure 3
10