Tabla de contenido
Idiomas disponibles
Idiomas disponibles
FIXED TIMING ALARM
Use this function to activate alarms with a predetermined
intervals of time.
This device includes 5 different intervals of time, in the screen
you will see the numbers from 1 to 5, which correspond to some
periods of time:
For example, if you confi gure the alarm at 11pm and choose the
numbers 1, 3 and 5, the alarm will be activated at 11pm, then will
turn off, and will be activated once again at 11:03 (number 1),
11:10 (number 3) and 11:20 (number 5).
1.- Press and hold R button for 3 seconds, in the screen will
display an icon and the numbers from 1 to 5.
2.- Press the Pointer button to choose a blink number or use
the Movement Arrow to select a number fi rst and the press the
Pointer once to store the interval of time in memory.
3.- To leave this mode, move to the right the Movement Arrow
button until the number 5 disappears.
5. If you chose a number, it will be displayed in the screen and
indicates the time when the alarm will be activated.
The setting alarm is based on the time when the user set
The setting alarm is based on the time when the user set
this parameter.
this parameter.
If you don't want to set this option, use the Movement Arrow
If you don't want to set this option, use the Movement Arrow
button until the number 5 disappears.
button until the number 5 disappears.
This function will be deactivated if you use the chronometer.
This function will be deactivated if you use the chronometer.
CHRONOMETER
1.- Press and hold the S and Pointer buttons. The icon of the
chronometer and the counter will be displayed in the screen.
2.- Press the Pointer to begin the count.
3.- To stop it, press the Pointer once again.
4.- If you want to store the registered time in memory, move to
the right the Movement Arrow control once, the number 2 blinks
1: 3 minutes
2: 5 minutes
3: 10 minutes
4: 20 minutes
5: 30 minutes
Tabla de contenido
