Final Assembly - Saris T-Rax Manual De Instalación

MOUNT TILT BRACKET
8
6
Insert 2.5" Carriage Bolt (short one) into square hole in tilt bracket
and through receiver tube.
7
9
Secure bolt with washer then nylock nut.
Note: DO NOT TIGHTEN until completely assembled.
8
12
Insert 2.5" Carriage Bolt (short one) into square hole in tilt
bracket.
10
7
15
Secure bolt with washer then nylock nut.
Note: DO NOT TIGHTEN until completely assembled.
MOUNT TILT BRACKET
7
7
Insert clevis pin through hole in tilt bracket and through receiver
tube.
10
11
10
Insert Base Tube into tilt bracket.
7
13
Insert 2.5" Carriage Bolt (short one) into square hole in tilt bracket.
11
7
16
Secure bolt with washer then nylock nut.
Now TIGHTEN ALL nuts with wrench.
7
9
7
8
10
11
8
Secure clevis pin by inserting cotter pin through hole.
11
Insert 3.5" Carriage Bolt (longest bolt) into square hole in tilt
bracket and Base tube.
7
7
14
Secure bolt with washer then nylock nut.
Note: DO NOT TIGHTEN until completely assembled.

Final Assembly

Be sure all bolts and pins are secured.
Tighten nuts with wrench.
Hitch Pin(9)
Short Bolts (8)
7
5
7
12
10
11
Long Bolt (12)