Remington REM-18-PCH-O Manual Del Usuario E Instrucciones De Operación página 8

Test Firing Heater
It is always a good idea to test fire your heater in a safe
and controlled environment, in an area with adequate
ventilation, and away from any combustibles to be sure
that all functions of the heater and gas supply system
are operating properly.
Leak test all gas connections with a 50/50 solution of
dish soap and water. DO NOT use a flame to test for
leaks!
Moving and Positioning the Heater
There is a brake in each of the front wheels of your
heater that helps keep it in place when in use. To
engage the brakes, push the lever down on each
wheel. To move the heater, release the brakes, simply
by flipping the levers on both brakes up.
DANGER
Ventilation
– Risk of indoor air pollution and Carbon
Monoxide Poisoning. Use heater only in
well ventilated areas.
– Refer to Safety Information on pages 1-2
for information about Carbon Monoxide
Poisoning.
– ALWAYS provide a fresh air opening in the
heated space of at least 3 square feet (2,800
sq. cm) for each 100,000 BTU / Hr. of heater
output. Provide a larger opening if more
heaters are being used.
© 2017, Pinnacle Climate Technologies, Inc.
NEVER LEAVE HEATER UNATTENDED WHILE BURNING, CONNECTED
TO A POWER SOURCE, OR WHILE CONNECTED TO A FUEL SOURCE
Operation
CARBON MONOXIDE POISONING MAY LEAD TO DEATH!
– FOR OUTDOOR USE. INDOOR USE
PERMITTED ONLY FOR: The temporary
heating of adequately ventilated buildings or
structures under construction, alteration or
repair.
Minimum Ventilation
Opening Needed
DANGER
non-adequately ventilated enclosed
spaces.
7
18-PCH-O
0.54 ft.
2
16.5 cm
2
Not for use in
residential living
areas or in
Cabinet Heater User's Manual