Technical Data; Lubrication / Servicing - Monti Bristle Blaster Manual De Instrucciones

Operating instructions
GB/US
8.

TECHNICAL DATA

Technical data: Bristle Blaster
Technical data: Air Pressure regulator
Noise figures
Vibration figures
8.1

Lubrication / servicing

Lubrication
If the tool is new, ensure the compressed air motor is lubricated prior to operation. If a series lubrication device is
not used, add a few drops of light oil to the compressed air connection daily. Correct lubrication will ensure longer
tool service life.
20
®
Pneumatic
Air consumption ....................................................... Litre/min. (CFM) Ø 500 (17,5) ± 10 %
Compressed air connection ........................................................................................R 1/4"
Necessary hose size.................................................................................. 3/8" ID (9,5 mm)
Weight .........................................................................................................................1,2 kg
Max. inlet pressure ..................................................................................... 25 bar (362 psi)
Compressed air connection ....................................................................................... G 1/4"
Weight ............................................................................................................................25 g
No-load (not under load)
No-load (not under load)
With 23 mm Belt
With 11 mm Belt
The A-weighted noise level of the tool is typically:
Sound pressure level L
PA
Wear hearing protection!
Belt
®
Bristle Blaster Belt
®
Bristle Blaster Belt
Without
Flow pressure
bar (psi)
6,2 (90)
5,2 (75)
6,2 (90)
5,2 (75)
=83.2 dB(A), sound power level L
Width
11 mm
23 mm
®
Bristle Blaster
Speed
revs/min.
3.500 ± 5 %
3.200 ± 5 %
2.300 ± 5 %
2.300 ± 5 %
=88.51 dB(A).
WA
Motor Handle
a / m/s² a
hw hw
0,77
2,03
0,15
Pneumatic
/ m/s²
0,99
1,93
0,17